ACOE MIX2 (130 Bar)

RECAMBIOS

Part Names Zone
Download PDF

  • RANGE

  • PAKING
    OPTIONS

  • SYSTEM

  • APLICATION

Qualities

  • All parts of product inlet pipe assembly made of stainless steel.
  • Forged aluminium body, polished and gold anodized.
  • High comfort because of the ergonomic design
  • Joints: PTFE (teflon) unalterable in the presence of dissolvent.
  • Needle: tungsten carbide.
  • Easy disassembly and easy maintenance.
  • Adjustable height fan, being completely uniform even in the lower position; that is to say that it is not overload at the ends
  • Moreover, the adjustment is gradual, as the throttle is turned round. There is not an instantaneous change.

Technical Characteristics

  • Air supply pressure max 6 bar
  • Working pressure recommended 1,5 - 2 bar (kg/cm2)
  • Fluid supply pressure Max 130 bar
  • Air consumption (pressure=2 bar / 29 psi) 9 m3/h (150 l/min)
  • Air compressor recommended (pump+spray gun)3 cv - HP
  • Transfer efficiency (*)80%±2
  • Extrem Temperature 4 a 39º C
  • FanAjustable
  • Net weight: spray gun + air cap
  • Gross weight: total box 866 gr
  • Box measurements 255x180x60 mm
  • Thread air inlet BSP (G) 1/4
  • Thread fluid inlet BSP (G) 1/4
  • Seat PTFE
  • Needle All of tungsten carbide
  • Wetted parts Stainless steel, PTFE

BOX INCLUDES

  • Spray gun mod. ACOE MIX22
  • Key
  • Brush
  • Type of Tungsten carbide nozzle see
  • type of cap air cap nº 52
Ref. 0ACMIX2130
back
Diseñado por